应用系统升级，系统down；Linux+CX500
请大家看看
关键词：
Oct 11 01:32:10 test kernel: sdh : READ CAPACITY failed.
Oct 11 01:32:10 test kernel: sdh : status = 1, message = 00, host = 0, driver = 08
Oct 11 01:32:10 test kernel: Current sd00:00: sense key Illegal Request
Oct 11 01:32:10 test kernel: Additional sense indicates Logical unit not supported
Oct 11 01:32:10 test kernel: sdh : block size assumed to be 512 bytes, disk size 1GB.
===================================================================
Oct 11 01:32:10 test kernel: scsi0 : QLogic QLA2312 PCI to Fibre Channel Host Adapter: bus 0 device 1 irq 47
Oct 11 01:32:10 test kernel: Firmware version: 3.03.01, Driver version 7.01.01-RH1
Oct 11 01:32:10 test kernel:
Oct 11 01:32:10 test kernel: scsi1 : QLogic QLA2312 PCI to Fibre Channel Host Adapter: bus 19 device 2 irq 29
Oct 11 01:32:10 test kernel: Firmware version: 3.03.01, Driver version 7.01.01-RH1
Oct 11 01:32:10 test kernel:
Oct 11 01:32:10 test kernel: blk: queue f7643e18, I/O limit 4294967295Mb (mask 0xffffffffffffffff)
Oct 11 01:32:10 test kernel: Vendor: DGC Model: RAID 10 Rev: 0216
Oct 11 01:32:10 test kernel: Type: Direct-Access ANSI SCSI revision: 04
Oct 11 01:32:10 test kernel: blk: queue f7643c18, I/O limit 4294967295Mb (mask 0xffffffffffffffff)
Oct 11 01:32:10 test kernel: Vendor: DGC Model: RAID 10 Rev: 0216
Oct 11 01:32:10 test kernel: Type: Direct-Access ANSI SCSI revision: 04
Oct 11 01:32:10 test kernel: blk: queue f7643a18, I/O limit 4294967295Mb (mask 0xffffffffffffffff)
Oct 11 01:32:10 test kernel: Vendor: DGC Model: RAID 10 Rev: 0216
Oct 11 01:32:10 test kernel: Type: Direct-Access ANSI SCSI revision: 04
Oct 11 01:32:10 test kernel: blk: queue f7643818, I/O limit 4294967295Mb (mask 0xffffffffffffffff)
Oct 11 01:32:10 test kernel: Vendor: DGC Model: RAID 10 Rev: 0216
Oct 11 01:32:10 test rpc.statd[3594]: Version 1.0.6 Starting
Oct 11 01:32:10 test kernel: Type: Direct-Access ANSI SCSI revision: 04
Oct 11 01:32:10 test kernel: blk: queue f7643618, I/O limit 4294967295Mb (mask 0xffffffffffffffff)
Oct 11 01:32:10 test kernel: Vendor: DGC Model: RAID 10 Rev: 0216
Oct 11 01:32:10 test kernel: Type: Direct-Access ANSI SCSI revision: 04
Oct 11 01:32:10 test kernel: blk: queue f7643418, I/O limit 4294967295Mb (mask 0xffffffffffffffff)
Oct 11 01:32:10 test kernel: Vendor: DGC Model: RAID 10 Rev: 0216
Oct 11 01:32:10 test kernel: Type: Direct-Access ANSI SCSI revision: 04
Oct 11 01:32:10 test kernel: blk: queue f7643218, I/O limit 4294967295Mb (mask 0xffffffffffffffff)
Oct 11 01:32:10 test kernel: Vendor: DGC Model: LUNZ Rev: 0216
Oct 11 01:32:10 test kernel: Type: Direct-Access ANSI SCSI revision: 04
Oct 11 01:32:10 test kernel: blk: queue f7643018, I/O limit 4294967295Mb (mask 0xffffffffffffffff)
Oct 11 01:32:10 test kernel: Vendor: DGC Model: LUNZ Rev: 0216
Oct 11 01:32:10 test kernel: Type: Direct-Access ANSI SCSI revision: 04
Oct 11 01:32:10 test kernel: blk: queue f7530e18, I/O limit 4294967295Mb (mask 0xffffffffffffffff)
Oct 11 01:32:10 test kernel: Vendor: DGC Model: Rev: 0851
Oct 11 01:32:10 test kernel: Type: Direct-Access ANSI SCSI revision: 04
Oct 11 01:32:10 test kernel: blk: queue f7530c18, I/O limit 4294967295Mb (mask 0xffffffffffffffff)
Oct 11 01:32:10 test kernel: Vendor: DGC Model: Rev: 0851
Oct 11 01:32:10 test kernel: Type: Direct-Access ANSI SCSI revision: 04
Oct 11 01:32:10 test kernel: blk: queue f7530a18, I/O limit 4294967295Mb (mask 0xffffffffffffffff)
Oct 11 01:32:10 test kernel: Vendor: DGC Model: Rev: 0851
Oct 11 01:32:10 test kernel: Type: Direct-Access ANSI SCSI revision: 04
Oct 11 01:32:10 test kernel: blk: queue f7530818, I/O limit 4294967295Mb (mask 0xffffffffffffffff)
Oct 11 01:32:10 test kernel: scsi(0:0:0:0): Enabled tagged queuing, queue depth 32.
Oct 11 01:32:10 test kernel: scsi(0:0:0:1): Enabled tagged queuing, queue depth 32.
Oct 11 01:32:10 test kernel: scsi(0:0:0:2): Enabled tagged queuing, queue depth 32.
Oct 11 01:32:10 test kernel: scsi(0:0:1:0): Enabled tagged queuing, queue depth 32.
Oct 11 01:32:10 test kernel: scsi(0:0:1:1): Enabled tagged queuing, queue depth 32.
Oct 11 01:32:10 test kernel: scsi(0:0:1:2): Enabled tagged queuing, queue depth 32.
Oct 11 01:32:10 test kernel: scsi(0:0:2:0): Enabled tagged queuing, queue depth 32.
Oct 11 01:32:10 test kernel: scsi(0:0:3:0): Enabled tagged queuing, queue depth 32.
Oct 11 01:32:10 test kernel: scsi(0:0:4:0): Enabled tagged queuing, queue depth 32.
Oct 11 01:32:10 test kernel: scsi(0:0:5:0): Enabled tagged queuing, queue depth 32.
Oct 11 01:32:10 test kernel: scsi(0:0:6:0): Enabled tagged queuing, queue depth 32.
Oct 11 01:32:10 test kernel: Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
Oct 11 01:32:10 test kernel: Attached scsi disk sdb at scsi0, channel 0, id 0, lun 1
Oct 11 01:32:10 test kernel: Attached scsi disk sdc at scsi0, channel 0, id 0, lun 2
Oct 11 01:32:10 test kernel: Attached scsi disk sdd at scsi0, channel 0, id 1, lun 0
Oct 11 01:32:10 test kernel: Attached scsi disk sde at scsi0, channel 0, id 1, lun 1
Oct 11 01:32:10 test kernel: Attached scsi disk sdf at scsi0, channel 0, id 1, lun 2
Oct 11 01:32:10 test kernel: Attached scsi disk sdg at scsi0, channel 0, id 2, lun 0
Oct 11 01:32:10 test kernel: Attached scsi disk sdh at scsi0, channel 0, id 3, lun 0
Oct 11 01:32:10 test kernel: Attached scsi disk sdi at scsi0, channel 0, id 4, lun 0
Oct 11 01:32:10 test kernel: Attached scsi disk sdj at scsi0, channel 0, id 5, lun 0
Oct 11 01:32:10 test kernel: Attached scsi disk sdk at scsi0, channel 0, id 6, lun 0
Oct 11 01:32:10 test kernel: SCSI device sda: 213909504 512-byte hdwr sectors (109522 MB)
Oct 11 01:32:10 test kernel: Partition check:
Oct 11 01:32:10 test kernel: sda: sda1 sda2
Oct 11 01:32:10 test kernel: SCSI device sdb: 83886080 512-byte hdwr sectors (42950 MB)
Oct 11 01:32:10 test kernel: sdb:<6>Device 08:10 not ready.
Oct 11 01:32:10 test kernel: I/O error: dev 08:10, sector 0
Oct 11 01:32:10 test kernel: Device 08:10 not ready.
Oct 11 01:32:10 test kernel: I/O error: dev 08:10, sector 0
Oct 11 01:32:10 test kernel: unable to read partition table
Oct 11 01:32:10 test kernel: SCSI device sdc: 227533824 512-byte hdwr sectors (116497 MB)
Oct 11 01:32:10 test kernel: sdc:<6>Device 08:20 not ready.
Oct 11 01:32:10 test kernel: I/O error: dev 08:20, sector 0
Oct 11 01:32:10 test kernel: Device 08:20 not ready.
Oct 11 01:32:10 test kernel: I/O error: dev 08:20, sector 0
Oct 11 01:32:10 test kernel: unable to read partition table
Oct 11 01:32:10 test kernel: SCSI device sdd: 213909504 512-byte hdwr sectors (109522 MB)
Oct 11 01:32:10 test kernel: sdd:<6>Device 08:30 not ready.
Oct 11 01:32:10 test kernel: I/O error: dev 08:30, sector 0
Oct 11 01:32:10 test kernel: Device 08:30 not ready.
Oct 11 01:32:10 test nfslock: rpc.statd startup succeeded
Oct 11 01:32:10 test kernel: I/O error: dev 08:30, sector 0
Oct 11 01:32:10 test kernel: unable to read partition table
Oct 11 01:32:10 test kernel: SCSI device sde: 83886080 512-byte hdwr sectors (42950 MB)
Oct 11 01:32:10 test kernel: sde: sde1
Oct 11 01:32:10 test kernel: SCSI device sdf: 227533824 512-byte hdwr sectors (116497 MB)
Oct 11 01:32:10 test kernel: sdf: sdf1
Oct 11 01:32:10 test kernel: sdg : READ CAPACITY failed.
Oct 11 01:32:10 test kernel: sdg : status = 1, message = 00, host = 0, driver = 08
Oct 11 01:32:10 test kernel: Current sd00:00: sense key Illegal Request
Oct 11 01:32:10 test kernel: Additional sense indicates Logical unit not supported
Oct 11 01:32:10 test kernel: sdg : block size assumed to be 512 bytes, disk size 1GB.
Oct 11 01:32:10 test kernel: sdg: I/O error: dev 08:60, sector 0
Oct 11 01:32:10 test kernel: I/O error: dev 08:60, sector 0
Oct 11 01:32:10 test kernel: unable to read partition table
Oct 11 01:32:10 test kernel: sdh : READ CAPACITY failed.
Oct 11 01:32:10 test kernel: sdh : status = 1, message = 00, host = 0, driver = 08
Oct 11 01:32:10 test kernel: Current sd00:00: sense key Illegal Request
Oct 11 01:32:10 test kernel: Additional sense indicates Logical unit not supported
Oct 11 01:32:10 test kernel: sdh : block size assumed to be 512 bytes, disk size 1GB.
Oct 11 01:32:10 test kernel: sdh: I/O error: dev 08:70, sector 0
Oct 11 01:32:10 test kernel: I/O error: dev 08:70, sector 0
Oct 11 01:32:10 test kernel: unable to read partition table
Oct 11 01:32:10 test kernel: sdi : READ CAPACITY failed.
Oct 11 01:32:10 test kernel: sdi : status = 1, message = 00, host = 0, driver = 08
Oct 11 01:32:10 test kernel: Current sd00:00: sense key Illegal Request
Oct 11 01:32:10 test kernel: Additional sense indicates Logical unit not supported
Oct 11 01:32:10 test kernel: sdi : block size assumed to be 512 bytes, disk size 1GB.
Oct 11 01:32:10 test kernel: sdi: I/O error: dev 08:80, sector 0
Oct 11 01:32:10 test kernel: I/O error: dev 08:80, sector 0
Oct 11 01:32:10 test kernel: unable to read partition table
Oct 11 01:32:10 test kernel: sdj : READ CAPACITY failed.
Oct 11 01:32:10 test kernel: sdj : status = 1, message = 00, host = 0, driver = 08
Oct 11 01:32:10 test kernel: Current sd00:00: sense key Illegal Request
Oct 11 01:32:10 test kernel: Additional sense indicates Logical unit not supported
Oct 11 01:32:10 test kernel: sdj : block size assumed to be 512 bytes, disk size 1GB.
Oct 11 01:32:10 test kernel: sdj: I/O error: dev 08:90, sector 0
Oct 11 01:32:10 test kernel: I/O error: dev 08:90, sector 0
Oct 11 01:32:10 test kernel: unable to read partition table
Oct 11 01:32:10 test kernel: sdk : READ CAPACITY failed.
Oct 11 01:32:10 test kernel: sdk : status = 0, message = 00, host = 1, driver = 00
Oct 11 01:32:10 test kernel: sdk : sense not available.
Oct 11 01:32:10 test kernel: sdk : block size assumed to be 512 bytes, disk size 1GB.
Oct 11 01:32:10 test kernel: sdk:SCSI disk error : host 0 channel 0 id 6 lun 0 return code = 10000
Oct 11 01:32:10 test kernel: I/O error: dev 08:a0, sector 0
Oct 11 01:32:10 test kernel: SCSI disk error : host 0 channel 0 id 6 lun 0 return code = 10000
Oct 11 01:32:10 test kernel: I/O error: dev 08:a0, sector 2
Oct 11 01:32:10 test kernel: SCSI disk error : host 0 channel 0 id 6 lun 0 return code = 10000
Oct 11 01:32:10 test kernel: I/O error: dev 08:a0, sector 4
Oct 11 01:32:10 test kernel: SCSI disk error : host 0 channel 0 id 6 lun 0 return code = 10000
Oct 11 01:32:10 test kernel: I/O error: dev 08:a0, sector 6
Oct 11 01:32:10 test kernel: SCSI disk error : host 0 channel 0 id 6 lun 0 return code = 10000
Oct 11 01:32:10 test kernel: I/O error: dev 08:a0, sector 0
Oct 11 01:32:10 test kernel: SCSI disk error : host 0 channel 0 id 6 lun 0 return code = 10000
Oct 11 01:32:10 test kernel: I/O error: dev 08:a0, sector 2
Oct 11 01:32:10 test kernel: SCSI disk error : host 0 channel 0 id 6 lun 0 return code = 10000
Oct 11 01:32:10 test kernel: I/O error: dev 08:a0, sector 4
Oct 11 01:32:10 test kernel: SCSI disk error : host 0 channel 0 id 6 lun 0 return code = 10000
Oct 11 01:32:10 test kernel: I/O error: dev 08:a0, sector 6
Oct 11 01:32:10 test kernel: unable to read partition table
