veritas9 是否可以继续自动备份当换完磁带后？ 磁带, 自动

Veritas9

Veritas BE 9.1  接单独的外置磁带机，没有library，只能放一盒磁带。 目前备份内容大于200G， 需要换磁带， 但是会提示点击Ok 才会继续。不知道改哪个设置选项让其在换完磁带后自动继续备份，不需要人工干预。

[ 本帖最后由 Veritas9 于 2007-11-18 12:33 编辑 ]

raykao1023

Media.jpg 的 prompt before overwritint allocated or imported media 勾拿掉 , 就可以了

Veritas9

覆盖提示已经搞定. 但是依然会有换磁带 media remove 的request. 参考最上面的第一张图. 我参考Veritas9的手册, 里面提到; 但是找不到这个修改response 截图.



： http://support.veritas.com/docs/263950   （中文手册）
     http://support.veritas.com/docs/266190 （英文手册）（
请参考英文手册中的823页 (pdf  文件的827页)

Edit Server Configurations

Edit Configuration enables you to configure Backup Exec to  set automatic responses to
several media alerts if those alerts have been  configured to use the option, Automatically
clear after. This option is found  on Backup Exec’s Alert Configuration dialog box.
If an alert appears and no  user intervention is taken by the user defined specified time, the
following  responses will occur, based on what you have selected in the following  table.
These responses include:
The following media alerts can be  configured to use automatic responses: Media
Overwrite, Media Remove, Media  Insert and Library Insert.
You can also use the Edit Configuration dialog box  to change the amount of time that a
media server waits to release a tape  drive before attempting to acquire another tape drive.
In addition, you can  also change the amount of time that the media server keeps
possession of a  tape drive after a job completes.
▼ To edit a media server  configuration:
1. Select a media server from either a media server group or  from the All Media Servers
subnode.
2. On the task pane, under Services  Tasks, click Edit Configuration.
[IMAGE]
Automated Alert Responses
Item  Description
Yes or OK Automatically responds Yes or OK to the generated  alert, if you take
no action.
No Automatically responds No to the  generated alert, if you take no action.
Cancel Automatically responds Cancel  to the generated alert, if you take no
action.
Running Backup Exec Utility  Services Tasks
824 Administrator’s Guide
Edit Server Configuration dialog  box
3. Enter the appropriate options as follows:
Edit Server Configuration  dialog box options
Item Description
Server(s) The name of the media server  where the service account is being
changed.
General
Delay before  mount
time (in seconds)
Changes the amount of time the media server waits  after releasing a
tape drive and before attempting to acquire a storage  device.
Note In a SAN SSO environment, this option should be used in
order  to keep one media server from monopolizing the storage
device.
Chapter 17,  Backup Exec Utility 825
Running Backup Exec Utility Services Tasks
Backup  Exec
Utility
Next job wait time (in
seconds)
Changes the amount of  time that the media server keeps possession
of a storage device after a job  completes.
Caution This option should be set to “0” in a SAN  SSO
environment.
Note This option is useful when multiple append jobs are  targeted
to a particular media server during the same backup window,
and  you want to save some time.
In a SAN SSO environment, as soon as a job  finishes, the
media server releases the storage device, which enables  the
media dismount sequence to begin. When another job is
submitted for  processing, the media mount sequence is
initiated. Each of these  mount/dismount sequences take time
to complete.
In a non-SAN SSO  environment, increasing the wait time
between jobs delays the start of the  media dismount sequence.
If an append job is sent to the storage device  before the
allotted time expires, the media dismount sequence is  averted
and the job starts immediately.
If an append job is not sent to  the storage device in the allotted
time, the media dismount sequence begins.  When finished, the
storage device is then released by the media server,  enabling it
to be accessed by other media servers.
Mount poll time Changes  the time interval (in seconds) before Backup Exec retries
mounting media in  order to run a job, or attempts to acquire a
storage device with media in  it.
Note In a SAN SSO environment, all media servers should use the
same  time interval, as this gives them all equal opportunity to
acquire a storage  device when jobs are submitted for
processing.
Automated Alert  Responses
Media Overwrite Alert
automated response
Enable you to set  the automated response for the Media Overwrite
Alert. Responses include: Yes  or OK, No, or Cancel.
Media Remove Alert
automated response
Enable you  to set the automated response for the Media Remove
Alert. Responses include:  Yes or OK, No, or Cancel.
Edit Server Configuration dialog box options  (continued)
Item Description
Running Backup Exec Utility SAN SSO  Tasks
826 Administrator’s Guide
See also:
“Running Backup Exec Utility  Services Tasks” on page 820
“Completing Tasks using the Backup Exec Utility”  on page 812

Veritas9

问题解决. 通过BEutility 工具, 然后会看到all media server,  然后点右键属性. 然后选择edit server configuration. 就可以发现这个选项了.

hubenteng

我也出现过类似的问题。我有一个600G的Lotus要备，需要三盘磁带A、B、C。这就出现了两个问题了：1、每次备满A它不提示我换B，以前是弹出个框来提示的，后来把auto display new alters前面的勾去掉之后就不报了，不知怎么恢复。
2、当它把600G数据备完之后，C磁带弹出可它不显示备份完成，这个问题最头痛，希望指点。