今天作了最简单的文件拷贝测试,1.1G测试文件,包括1个iso的大文件,一些小文件。
测试环境(hp dl580 g3, widows 2003 sp2, qla2340x2)通过2台FC switch 连接到eva8000:
======================================================================
testing
server(SANsurfer output):
OS Type: windows2003 enterprise edition x86
OS Version: SP2(Build 3790)
HBA Model:qla2340
HBA Driver Version: STOR Miniport
9.1.3.16
HBA BIOS Version:1.45
HBA Firmware Version:3.03.21
Smart array(System Management output)
Model: Smart Array 6i
Firmware Version: 2.80
Driver version:
5.70.0.32 Build 1(x86)
EVA8000
Type: HSV210
Version:6100
SAN Switches Current Firmware Information:
FOS Primary Partition: 5.3.0d
FOS Secondary Partition:5.3.0d
============================================================================
拷贝的测试结果如下
============================================================================
f:-->D 21.92S 50M/s
D:-->F 25.18S 43m/s
D:-->D 42.44S 25.81M/s
D:-->o 30.10S 36M/s
o:-->D 16.75s 65M/s
说明:F盘为eva上面的vdisk(10k FC)
o盘为eva上面的vdisk(FATA)
D盘为本地
scsi盘
=================================================================================
刚才run了下evaperf as:
=================================================================================
Total Total Node
Host Host
Req/s MB/s
----- ------ -------------------
1968 92.56 xxxx-xxxxx-xxxx-xxxxxxxx
Cycle: 0
Polling interval: 5 seconds
This cycle took: 62 ms
Use Ctrl-C to exit
Total Total Node
Host Host
Req/s MB/s
----- ------ -------------------
2628 114.92 xxxx-xxxxx-xxxx-xxxxxxxx
Cycle: 1
Polling interval: 5 seconds
This cycle took: 0 ms
Use Ctrl-C to exit
Total Total Node
Host Host
Req/s MB/s
----- ------ -------------------
2082 99.54 xxxx-xxxxx-xxxx-xxxxxxxx
Cycle: 2
Polling interval: 5 seconds
This cycle took: 0 ms
Use Ctrl-C to exit
Total Total Node
Host Host
Req/s MB/s
----- ------ -------------------
2232 98.27 xxxx-xxxxx-xxxx-xxxxxxxx
Cycle: 3
Polling interval: 5 seconds
This cycle took: 0 ms
Use Ctrl-C to exit
Total Total Node
Host Host
Req/s MB/s
----- ------ -------------------
1949 87.36 xxxx-xxxxx-xxxx-xxxxxxxx
Cycle: 4
Polling interval: 5 seconds
This cycle took: 0 ms
Use Ctrl-C to exit
希望这里有高人帮忙分析下